Skip to content

Privacy Fences in Benton

Benton Privacy Fence Installation

Privacy Fence Installation in Benton

Six feet of solid board between you and the neighbor twenty feet away. Delta Fence builds privacy fences for Benton yards with reinforced posts and tight board spacing, set to handle Saline County wind and last for years. Licensed, insured, bonded.

Get a Free Quote Call (501) 626-7024
Privacy on a Suburban Lot

Why Benton’s Newer Subdivisions Ask for Privacy First

Privacy is the top request we get in Benton, and the reason is the lots. The subdivisions filling in off Alcoa Road and along the I-30 corridor sit on smaller footprints than the older parcels near downtown, which means the house next door is close, the patios almost face each other, and a backyard is not really yours until there is a solid fence around it. A six-foot privacy run turns a tight Benton lot into a usable, private space, and that is what most new homeowners here are after: a yard where the kids and the dog can be out and the neighbor’s window is not looking straight in.

A privacy fence has one job, and it has to do it without falling over. That means tight boards with no gaps, full six-foot height, and posts that can take a gust. Benton catches storm wind rolling across the open ground south of I-30, and a tall solid fence catches all of it. We reinforce our posts and set them in concrete so your privacy fence holds the line when the weather turns. A fence that blows down the first spring was never private to begin with, and on a close Benton lot a leaning fence is a problem you and the neighbor both have to look at.

There is another reason privacy fences get ordered here, and it is quieter than the neighbor question. Benton backs up to busy roads. Yards near Military Road, Sevier Street, and the frontage along I-30 pick up traffic noise and headlights, and a solid six-foot run knocks both down in a way an open picket never will. It will not make the yard silent, no fence does, but homeowners tell us the difference on the patio is real. Add the dog that barks at everything that moves and the pool the insurance company wants enclosed, and a solid fence quits being a luxury and starts being the thing that makes the yard work.

Privacy fence installation in Benton, AR by Delta Fence LLC
Styles & Materials

Solid Board, Board-on-Board, and Why Cedar Wins

We build privacy fences three main ways. Solid board is the classic: pickets butted edge to edge for a clean wall of wood. Board-on-board overlaps the pickets so there are no sight gaps even after the wood dries and shrinks, and it looks the same good from both sides, which matters on a close Benton lot where the neighbor sees your fence as much as you do. Shadowbox alternates boards front and back, which softens the wind load coming off the open ground and still gives you privacy. We talk through which one fits your yard, your budget, and how much wind your spot catches.

For a privacy fence, we steer most Benton homeowners toward cedar, and here is why. A privacy fence is a lot of wood standing in one place, and cedar handles moisture and bugs better than anything else without constant upkeep. On a tall solid run, the difference between cedar and cheaper wood shows up fast. Cedar stays straight and tight. Lesser wood cups and warps, and on a board-on-board fence a warped picket opens a gap right where you wanted privacy. Every privacy fence we build gets American-sourced lumber, screw fasteners, and concrete-set posts, and we hand-select the pickets so you are not getting the bowed boards the cheaper outfits run straight off the pallet. If a Benton HOA caps the height or dictates the style, we check the covenants before we build. Old fence on the line? We tear it out and haul it. When Benton requires a permit for a six-foot fence, we tell you before we dig.

One more thing worth deciding up front is the gate, because the gate is the part of a privacy fence you touch every day. We build our gates on steel frames instead of bare wood, and that is a bigger deal than it sounds. A six-foot cedar gate is heavy, and a heavy gate on a wood frame sags until it drags the ground and will not latch. The steel frame keeps it square for the life of the fence. Tell us how you use the yard, whether the mower comes through the side or the boat needs a double gate to the back, and we size the openings so the fence never gets in your way.

Why Delta Fence

Built for Benton Wind and Benton Lots

■

Solid Board or Board-on-Board

Choose a clean wall of butted pickets or overlapping boards with zero sight gaps that look sharp from both sides, which matters on a close Benton lot.

■

Reinforced, Concrete-Set Posts

A six-foot fence catches Saline County wind. We reinforce the posts and set them in concrete so your Benton privacy fence stays plumb through storm season.

■

Hand-Selected Cedar

We pick straight, tight cedar pickets by hand, so your privacy run does not open up with gaps when the wood dries and settles in the Benton heat.

FAQ

Benton Privacy Fence Questions

How tall should a privacy fence be in Benton?

Six feet is standard for full privacy and what most Benton homeowners want, especially on the tighter subdivision lots where the neighbor is close. Some HOAs off Alcoa Road or specific lot lines cap the height, so we check the rules for your property before we build.

Do Benton HOAs have rules about privacy fences?

Many of the newer Benton subdivisions do. The covenants can spell out maximum height, setback from the line, which side the finished face points, and sometimes the stain color. We read your specific HOA requirements before we design the fence so it clears the board on the first pass.

What is the difference between solid board and board-on-board?

Solid board butts the pickets edge to edge for a flat wall of wood. Board-on-board overlaps them, so even after the wood dries and shrinks there are no sight gaps, and it looks finished from both sides. Board-on-board costs a bit more and is the better pick on a close Benton lot where you want zero gaps long term.

Will a tall privacy fence survive Benton storm wind?

It will when it is built right. We reinforce the posts, set them in concrete below the freeze line, and can build shadowbox style to cut the wind load coming off the open ground south of I-30. A privacy fence that falls in the first storm was put up wrong, and that is not how we build in Saline County.

Why do you recommend cedar for privacy fences?

A privacy fence is a large amount of wood in one tall run, so the quality of the wood matters more than on a low fence. Cedar resists rot and bugs and stays straight, which keeps the boards tight and the privacy intact. Cheaper wood warps and opens gaps right where a Benton homeowner wanted the screen.

Can you replace an old privacy fence that is falling apart?

Yes. We pull the failing fence, haul it off, and build you a new one on the same line, or a corrected line if the old fence sat wrong. You do not lift a board on your Benton property.

How long does a privacy fence installation take in Benton?

Most residential privacy fences in Benton go up in one to three days once materials are on site. The variables are the length of the run, how many gates you want, and what we find in the ground, since rocky spots slow the post holes down. We give you the schedule with the quote and we keep to it. You will know the plan before the first hole gets dug.

Do you stain or seal privacy fences?

We recommend letting new cedar dry for a few weeks before any stain or sealer goes on, and we will tell you when yours is ready. A good sealer helps the fence shed water and hold its color instead of going gray. Some Benton HOAs specify the stain color, which is one more reason we read the covenants first. Either way the fence is built to stand, stained or not.

Service Area

Serving Benton, AR

Delta Fence LLC serves Benton and the surrounding Saline County communities including Bryant and Alexander. We run crews out this way regularly, so a Benton privacy fence does not sit on a waiting list for weeks, and the same build standard applies whether the yard is in a new subdivision off Alcoa Road or an older lot near downtown. See completed projects in our fence gallery.

Related Services

More Fencing Across Benton

Benton Wood Fences

Cedar, pine, and cypress wood fences for Benton homes, set in concrete with screw fasteners.

See More →

Benton Vinyl Fencing

No-maintenance privacy panels and picket fencing for Benton properties.

See More →

Benton Commercial Fencing

Security perimeters and access-controlled gating for Benton businesses.

See More →
Get Started

Get the Privacy Your Benton Yard Should Have

Solid board, board-on-board, or shadowbox in cedar, built to stand on a close suburban lot. Licensed, insured, and bonded. Call Kade for a straight quote.

(501) 626-7024 kadeendl@gmail.com Get a Free Quote
Call Now Free Quote