An automated driveway gate in Little Rock typically runs five to fifteen thousand dollars depending on gate type, gate weight, operator brand, and access controls. A standard residential single-swing with a LiftMaster operator and a keypad falls toward the lower end; a double-swing with FAAC underground operators, intercom, and smartphone control falls toward the upper end. Commercial cantilever installs run higher. Call (501) 626-7024 for a line-item quote.

Swing gates suit driveways with room behind the gate line for the leaf to open. Slide gates suit driveways with no swing room or with a sloped approach, and they handle narrower side-yard access. Cantilever gates suit commercial properties where a ground track would interfere with snow plowing or large-truck access. We walk the driveway and recommend the type that actually fits the geometry rather than defaulting to whatever the homeowner saw on a neighbor’s house.

We install LiftMaster and FAAC. LiftMaster is the right call for most Little Rock residential and light-commercial installs — CSL24UL for slide, LA500U for swing. FAAC sits a tier higher in build quality and is the right call for higher-end residential, commercial properties with heavy daily traffic, and any underground operator installation (the FAAC 760 is the gold-standard underground swing).

Sometimes. The existing gate has to be structurally sound, sized correctly for an automated operator, and built with hinges and posts that can take the cycle loading. Most lightweight ornamental manual gates are not good candidates for retrofit because the hinges and posts were never sized for repeated automatic operation. We walk the existing gate and either fit an operator or recommend a new gate sized for automation, depending on what is there.

Every automated gate we install meets UL 325 with the right combination of photo-eye sensors and edge sensors for the gate type and the operator class. We do not skip this — entrapment safety is non-negotiable. This is a common area where low-bid installers cut corners and the homeowner finds out later that the gate is not code-compliant.

A standard residential automated gate install in Little Rock typically runs three to five days. Day one sets the gate posts in deep concrete with a twenty-four-hour cure, day two installs the gate leaves and hangs them, day three installs the operator and runs the electrical from the gate post to the operator housing, day four sets the access controls and runs the safety devices. Commercial cantilever installs run longer.